How to use the face mask machine?

The face mask machine can help manufacturers to produce a large number of masks efficiently and quickly. In the current situation in which the new coronary epidemic has not been effectively combated, the use of face mask machines remains very important. The process of using the face mask machine is briefly presented below.

What should we consider before using the face mask machine?

How can we produce the mask by the mask machine?

What are the product characteristics of the ultrasound mask machine?

What should we consider before using the face mask machine?

1. Turn on the start-stop switch and the mains switch of the face mask machine, and the built-in light of the mains switch lights up.

2. Set the air pressure of the face mask machine: the air pressure valve is under the work table and you can see the air pressure valve by opening the door of the device. Adjust the pressure of the actual situation. If some mechanisms are not synchronized, increase the pressure.

How can we produce the mask by the mask machine?

The fully automatic inner ear mask machine uses ultrasonic welding. When the mask is moved into the processing position, ultrasonic waves are automatically generated, which form a micro amplitude and a high-frequency oscillation on the ear arch, which is immediately converted into heat, the material to be processed melts, and finally, the earrings are permanently glued or embedded in the mask body, the last processing step in the manufacture of inner ear-band masks. Only one operator is required to place the mask body piece by piece in the mask layer. The following actions are carried out automatically by the equipment until the finished product is finished.

What are the product characteristics of the ultrasound mask machine?

The ultrasonic face mask machine uses the ultrasonic welding process. A conveyor system is installed on the machine. The mask is fed to the conveyor, wrapped by a decorative clock, and then pressed by an ultrasonic flower wheel. The tape is cut to release the finished product. It only takes one person. The mask body is placed on the conveyor belt of the machine and the rest of the finishing is done automatically.

Characteristics of ultrasonic masking:

1. The frame of the ultrasonic mask machine consists of aluminum alloy and stainless steel and the appearance is light and beautiful without rust.

2. The ultrasonic face mask machine can count automatically, allowing efficient control of production efficiency and production plan.

3. The ultrasonic mask can be controlled by frequency conversion and the speed of operation of the equipment can be adapted to actual needs.

4. The ultrasonic mask machine can pull the tube into the material, the positioning is more precise, the width of the raw material can be controlled to a minimum, and the costs are saved.

5. The length and size of the final product are controlled uniformly with a deviation of one millimeter, allowing the length of the final product to be effectively controlled.

6. The ultrasonic mask machine has a high degree of automation and low demands on the operator. It just needs to unload the materials and arrange the finished products.

7. Ultrasonic mask machine accepts ultrasound Taiwan system, Japanese converters, consistent performance, and comfortable operation.

Eight. The automatic ultrasonic welding wheel consists of imported high-quality steel DC53, which prolongs the durability of the shape and is wear-resistant and durable.

Seeing this, do you also want to order an mask machine? If necessary, you can contact STRONG H MACHINERY TECHNOLOGY CO.,LTD they will provide the mask machine of the best quality.