Publish Time: 2022-04-06 Origin: Site
The correct use of computerized embroidery machines spare parts can improve the production efficiency of garment factories. Therefore, it is very important for factory employees to learn to use computerized embroidery machines spare parts correctly. The following will briefly introduce the correct use of computerized embroidery machines spare parts.
What should we understand before using the computerized embroidery machines spare parts?
What are the steps to use computerized embroidery machines spare parts?
How to choose the accessories of computerized embroidery machines spare parts?
Generally, the first line of computerized embroidery machines spare parts is the plate reading zone. The second line is the color order setting. The third line is the frame shift. The last line is the machine parameters.
The first step is to make the embroidered belt on your own computer. It can also be produced through an outside plate making center or provided by the customer.
The second step is to save the version on a floppy disk or U disk ---- This depends on the input method of your embroidery machine.
Step 3: After inputting the version tape into computerized embroidery machines spare parts, select the version tape to be embroidered from the memory of computerized embroidery machines spare parts. Then set the starting point (the place where the first stitch starts), check the frame (the master can bypass this process) ---- check how large the embroidery area of the pattern to be embroidered is, set the thread color sequence, and then lay the backing paper ( There are many kinds of materials), pull the bar to embroider once (the cross bar under the table, pull to the left to start and fast forward, to the right to stop and reverse), after embroidering the frame on the backing paper, use scissors to Cut off the outer frame, stick double-sided tape on the periphery, put a backing paper (usually two layers) on the bottom of the backing paper, paste your fabric, and align the positions, then pull the bar to embroider.
It mainly depends on what kind of products you use, most of computerized embroidery machines spare parts now have 20 heads, with 27.5cm, 30cm, 33cm, and 40cm head spacing. If you are making lace, water-soluble, pike and the like, the general situation is 30, and you can use 27.5 and 40 for small pieces.
The computerized embroidery machines spare parts can greatly improve the production efficiency of the factory, so it has received a warm welcome in the market. STRONG H MACHINERY TECHNOLOGY CO.,LTD, has been committed to providing customers with reliable products and perfect after-sales service so that customers can invest easily, use them with confidence, and have no worries.
An advanced brand of sewing machine parts——Strong H